The two bills in a stall
Stall quotes are easier to read once you separate two bills. The organiser rents you floor space. A contractor builds what stands on it. A shell scheme blurs the line, because the organiser's rent includes a basic booth. So ask which bill each number belongs to.
The venue charges the organiser too. BIEC in Bengaluru lists ₹265 per square metre per day for its halls on show days, and ₹138 on set-up and dismantling days, in its rate card for April 2025 to March 2026. Venue costs like these are part of what organisers pay.
Space rent: what published fair rates show
An ITPO fair
ITPO, under the Ministry of Commerce and Industry, listed the 38th India International Leather Fair (IILF) at the Chennai Trade Centre for 1 to 3 February 2025, with bookings on a first-come, first-served basis. Its terms for Indian participants listed the following.
- Shell scheme at ₹13,000 per square metre, and bare space at ₹12,500, with GST at 18% charged extra.
- A minimum of 36 square metres for bare space and 9 square metres for shell scheme.
- A compulsory web catalogue charge of ₹3,500 per company, plus GST.
- Extra power, water and compressed air on payment, with requests due by 10 January 2025.
- A general height limit of 3 metres for a bare-space stall. A logo or branding feature may go up to 4.5 metres, as a central feature only and not along a whole side wall, except in foyers and hangars. In foyers the limit is 3 metres.
Rules like the height limit decide what your contractor can build, so they touch the build bill too.
The Auto Expo
The Bharat Mobility site lists space rates for the Auto Expo Motor Show 2025, listed for Bharat Mandapam in New Delhi from 17 to 22 January 2025.
- Raw space, minimum 50 square metres: ₹9,500 per square metre for members and ₹10,500 for non-members. Raw space means bare floor.
- Shell scheme, minimum 12 square metres: ₹12,500 for members and ₹13,000 for non-members.
- The page calls these provisional rates and says GST is charged extra.
- Four smaller shows on the same page, the India Cycle Show, Bharat Battery Show, Steel Pavilion and Mobility Tech Pavilion, list electricity at ₹2,000 per kW per day. The Auto Expo Motor Show section lists no electricity rate.
Ask the organiser who counts as a member, because the gap between member and non-member rates adds up on a large stall.
A Kolkata fair, booked through a council
The India International Mega Trade Fair at Science City Ground, Kolkata, was listed for 5 to 26 December 2025. EPCH's fact sheet names its organisers as the Bengal Chamber of Commerce & Industry and G.S. Marketing Associates. The Export Promotion Council for Handicrafts (EPCH) offered booths in it to its members, and the fact sheet shows both the full price and the supported price.
- The actual cost of a booth is listed at ₹20,978 per square metre. The fact sheet does not say whether GST is in this figure.
- A 9 square metre booth is listed at ₹1,88,800 including GST. The member pays ₹94,400 including GST, with financial help from the Office of the Development Commissioner (Handicrafts).
- The booth includes one table, two chairs, three spotlights, one 15 amp plug point, a waste paper basket and wall-to-wall carpet in an air-conditioned pavilion.
This was a 22-day fair with retail sale allowed, so its rate covers 22 days against the 3 days of IILF Chennai. When you compare rates, compare them for the same number of days.
Working out the space bill
You can work out the space bill yourself before you talk to any contractor. Take the organiser's terms and add these lines, using your own size and dates.
- The area times the rate per square metre, for bare space or shell scheme. Check the minimum size first.
- GST on the rent. ITPO and the Auto Expo page both charge it extra.
- Power: the load you need, at the organiser's rate. Some shows charge per kW per day, so count the show days.
- Fixed fees, such as a catalogue entry.
- At an ITPO fair, an interest-free deposit equal to any tax you deduct at source (TDS), refunded once ITPO receives the TDS certificate.
- Less any subsidy you qualify for, paid or reimbursed as the scheme says.
Then add the build quote. The total is what the stall costs you, and it is the number to weigh against the meetings and leads you expect from the show.
Help that cuts the space bill
Small firms should check for support before they book.
- The Office of the Development Commissioner (MSME) runs the Procurement and Marketing Support (PMS) scheme. Its scheme page lists an 80% subsidy on built-up space rent for general category micro and small enterprises (MSEs), and 100% for SC/ST, women, persons with disabilities and units from aspirational districts.
- The scheme guidelines in force from 26 July 2022 cap total support per firm per event, including travel, publicity and freight, at ₹1.5 lakh in metro and A-class cities and ₹0.8 lakh in other cities, including taxes. A firm can claim for up to 2 events a year, and must file the claim online within 30 days of the event. Confirm the current terms with your local MSME office.
- For the MSME Pavilion at IITF 2026, the FAQ from the Office of the Development Commissioner (MSME) says eligible SC/ST, women, persons with disabilities, aspirational district and North East units get stalls free of cost, subject to selection. Other selected MSEs pay 20% of the stall cost, given as ₹24,924.
- Export promotion councils can book a pavilion and offer booths to members, as EPCH did in Kolkata.
Read the scheme terms closely. Some help applies only to built-up space, and a selection committee decides who gets a stall.
The stall build: what drives the cost
For the build we found no public rate. Pharmexcil, the pharmaceuticals export promotion council, issued a request for proposal for an official stand contractor at IPHEX 2026, listed for Bharat Mandapam from 7 to 9 September 2026. It asks contractors to quote in rupees per square metre, for an estimated 4,000 square metres of shell space and 8,600 of bare space. It publishes no rate. What it does show is how one tender prices organiser shell booths: by area, with a list of what each booth gets.
For a 9 square metre shell booth, that list includes walls, a fascia with the exhibitor's name, carpet, a lockable counter, three chairs, a round table, a power socket and six LED spotlights. A custom stall replaces this kit with your own design, and these things move its price.
- Floor area. Ask whether the build is priced on area; our stall design page notes custom stalls are priced that way.
- Open sides. Our stall design page notes that more open sides bring more walk-ins. Ask the organiser whether corner and island spaces cost more.
- Build option. Our stall page lists six, from a shell scheme upgrade at the low end to a double-decker at the high end.
- Materials and finish. Laminate, paint, fabric print and backlit panels.
- Height and structure. A double-decker needs structural design and a stability certificate, where the hall allows one.
- Screens, lighting and sound, hired for the show days.
- Transport, build-up labour and night work. A stall built in another city has to travel.
- Reuse. Our stall design page notes that a stored modular stall can cost less at later shows.
Ask the contractor to show each of these on its own line, with hired items marked.
What a stall quote should list
- The show, the hall, the stall number, the size and the open sides.
- Which bill it covers: build only, or build plus space rent and organiser charges.
- A 3D view, and drawings in the organiser's format.
- Materials and finish, with samples.
- Graphics: number of panels, print type and size.
- Furniture, lights, screens and sound, and whether they are bought or hired.
- Transport, build-up and dismantling labour, and any night work.
- The power load to order from the organiser, and who pays for it.
- Show-day crew and visitor capture, if included.
- Who pays if something is damaged during build-up, the show or dismantling.
- Taxes shown apart, and the payment dates.
How to compare two stall quotes
- Strip out space rent and organiser charges. Compare the build alone.
- Match the scope: same size, same open sides, same height, same AV.
- Check transport, installation and dismantling. A low build price can leave them out.
- Check the drawings follow the exhibitor manual. A rejected drawing means rework at the hall.
- Ask what you keep after the show. A reusable stall changes the sum for the next fair.
Say Quote A builds a 36 square metre stall and leaves out transport, dismantling and screens. Quote B includes them. A looks lower until you add those lines. The example is made up and carries no figures.
Mistakes that raise the cost
- Booking late, when bookings are first come, first served, as ITPO's IILF terms set them.
- Ignoring the manual's height and fire rules, then rebuilding at the hall.
- Ordering power after the organiser's deadline. ITPO's IILF terms set 10 January 2025 as the last date for extra power.
- Dismantling outside the hours the organiser allows.
- Building a new stall for each show when a modular one would do.
- Counting space rent twice, or leaving it out, when two vendors split the work.
When to ask for help
Ask for help on a first show, when you exhibit several times a year, or when the stall must bring back leads you can count. Our exhibition stall design page explains the build options, and the events and exhibitions page covers choosing the show and following up visitors. To set the total budget, try the marketing budget calculator, and see what marketing costs in India.
















































